I-Mini Load Stacker Crane yeBhokisi
Imininingwane Yomkhiqizo
Idube
Ingulule
Ukuhlaziywa Komkhiqizo
Idube
| Igama | Ikhodi | Inani elijwayelekile (mm) (idatha enemininingwane inqunywa ngokuya ngesimo sephrojekthi) |
| Ububanzi bempahla | W | 200 ≤W ≤800 |
| Ukujula kwempahla | D | 200 ≤D ≤ 1000 |
| Ukuphakama kwempahla | H | 60 ≤H ≤600 |
| Ubude obuphelele | GH | 3000＜GH ≤ 10000 |
| Ubude besiphetho sesitimela esiphezulu | F1,F2 | Qinisekisa ngokohlelo oluthile |
| Ububanzi bangaphandle be-stacker crane | A1,A2 | Qinisekisa ngokohlelo oluthile |
| Ibanga le-Stacker crane ukusuka ekugcineni | A3,A4 | Qinisekisa ngokohlelo oluthile |
| Ibanga lokuphepha lebhafa | A5 | I-A5 ≥200 (i-polyurethane), i-A5 ≥ 100 (i-hydraulic buffer) |
| I-buffer stroke | PM | PM ≥ 75 (i-polyurethane), ukubala okuqondile (i-hydraulic buffer) |
| Ibanga lokuphepha leplathifomu yezimpahla | A6 | ≥85 |
| Ubude bokuphela kwe-Ground Rail | B1,B2 | Qinisekisa ngokohlelo oluthile |
| Isisekelo samasondo e-Stacker crane | M | M=W+1530(W≥600) M=2130(W＜600) |
| I-offset yesitimela ephansi | S1 | Qinisekisa ngokohlelo oluthile |
| Izingoma eziphezulu ze-offset | S2 | Qinisekisa ngokohlelo oluthile |
| Uhambo Lokuthatha | S3 | ≤2000 |
| Ububanzi bebhampa | W1 | - |
| Ububanzi bendawo | W2 | I-D+200(D≥800), 1000(D＜800) |
| Ukuphakama kwesitezi sokuqala | H1 | Ukujula okukodwa H1 ≥650, ukujula okuphindwe kabili kwe-H1 ≥ 750 |
| Ukuphakama kwezinga eliphezulu | H2 | I-H2 ≥H+430(H≥400) H2 ≥830(H＜400) |
Izinzuzo:
I-Zebra series ingumkhiqizo we-crane stacker osayizi ophakathi, ubude bokufakwa bungaphansi kwama-20m, isivinini sokuhamba singafinyelela ku-240m/min, ukusheshisa kungu-1.5m/s2, kanti umthwalo ungafinyelela ku-300kg.
* Idizayini efakazelwe yale crane yesitaki ivumela ukugeleza kwempahla ukuthi kuphathwe ngendlela eguquguqukayo kakhulu.
• I-Zebra series stacker crane iyisisetshenziswa esinosayizi omaphakathi nobude obufika kumamitha angama-20.
• Ijubane lokuhamba lingafinyelela ku-240 m/min kanti umthwalo ungafinyelela ku-300 kg.
• Le crane yesitaki inomklamo ofakazelwe futhi ingakwazi ukuphatha imithwalo esindayo ngamandla.
• Uchungechunge lubukeka lulula futhi luncane, kodwa empeleni luqinile futhi luqinile, nesivinini sokuphakamisa esingafika ku-180 m/min.
• I-variable frequency drive motor (IE2), isebenza kahle
• Amayunithi emfoloko angenziwa ngezifiso ukuphatha imithwalo ehlukahlukene.
• Ubude obuncane besitezi sokuqala: 550mm~850mm.
Imboni Esebenzayo:isitoreji se-cold chain (-25 degree), indawo yokugcina impahla efrijini, i-E-commerce, isikhungo se-DC, ukudla nesiphuzo, amakhemikhali, imboni Yemithi, eyezimoto, ibhethri ye-lithium Njll.
Iphrojekthi icala:
| Imodeli Igama | I-TMBS-B1-200-15 | ||||
| Ishalofu labakaki | Ishalofu Elijwayelekile | ||||
| Ukujula okukodwa | I-Doubledeep | Ngamunye | Ukujula kabili | ||
| Umkhawulo wobude obukhulu ngu-GH | 15m | ||||
| Umkhawulo wokulayisha omkhulu | 200kg | ||||
| Isivinini sokuhamba esiphezulu | 240m/min | ||||
| Ukusheshisa ukuhamba | 0.5m/s2 | ||||
| Isivinini sokuphakamisa(m/min) | Kulayishwe ngokugcwele | 40 | 40 | 40 | 40 |
| Akukho mthwalo | 40 | 40 | 40 | 40 | |
| Ukuphakamisa ukusheshisa | 0.5m/s2 | ||||
| Isivinini semfologo(m/min) | Kulayishwe ngokugcwele | 40 | 40 | 40 | 40 |
| Akukho mthwalo | 60 | 60 | 60 | 60 | |
| Ukusheshisa imfoloko | 0.5m/s2 | ||||
| Ukunemba kokuma okuvundlile | ± 3 mm | ||||
| Ukuphakamisa ukunemba kokuma | ± 3 mm | ||||
| Ukunemba kokuma kwemfoloko | ± 3mm | ||||
| I-Stacker crane Net Weight | Cishe i-4,000kg | Cishe ama-4500kg | Cishe ama-4000kg | Cishe ama-45,00kg | |
| Umkhawulo wokujula komthwalo D | 600~800 (kufaka phakathi) | 600~800 (kufaka phakathi) | 600~800 (kufaka phakathi) | 600~800 (kufaka phakathi) | |
| Umkhawulo wobubanzi bokulayisha W | W ≤600 (okuhlanganisiwe) | ||||
| Ukucaciswa kwezimoto kanye namapharamitha | Izinga | AC;7.5kw;3;380V | |||
| Phakama | AC;5.5kw;3;380V | ||||
| Imfoloko | AC;0.37kw;3 ψ;4P;380V | AC;0.37kw;3 ψ;4P;380V | AC;0.37kw ;3 ψ ;4P;380V | I-AC;0.37kw; 3 ψ;4P;380V | |
| Ukunikezwa kwamandla kagesi | Ibha yebhasi(5P; kufaka phakathi ukubeka phansi) | ||||
| Ukucaciswa kokunikezwa kwamandla | 3 ψ ;380V±10%;50Hz | ||||
| Umthamo wokuphakelwa kwamandla | cishe 15kw | ||||
| Ukucaciswa kwezitimela eziphezulu | I-Angle steel 80 * 80 * 8mm (Ibanga lokufakwa kwesitimela esiphezulu alikho ngaphezu kuka-1300mm) | ||||
| Izitimela eziphezulu ze-S2 | - 320 mm | ||||
| Ukucaciswa kwe-Ground Rail | 22kg/m | ||||
| I-Ground rail offset S1 | - 60 mm | ||||
| Izinga lokushisa lokusebenza | -5 ℃ ~ 40 ℃ | ||||
| Umswakama osebenzayo | Ngaphansi kuka-85%, akukho ukufingqa | ||||
| Amadivayisi okuphepha | Vimbela ukonakala kokuhamba: inzwa ye-laser, ukushintshwa komkhawulo, i-hydraulic buffer Vimbela amakheshi kusuka phezulu noma phansi: izinzwa ze-laser, amaswishi anomkhawulo, amabhafa Umsebenzi wokumisa izimo eziphuthumayo: inkinobho yokumisa isimo esiphuthumayo Isistimu yebhuleki ye-EMSSafety: isistimu yebhuleki kagesi enomsebenzi wokuqapha Intambo ephukile (iketango), ukutholwa kwentambo exekethile (iketango): inzwa, indlela yokubopha umsebenzi wokuthola indawo yeCargo, inzwa yokuhlola isikhungo semfoloko, ukuvikela umkhawulo we-torque yeforki Idivayisi yokulwa nokuwa: ukutholwa komumo wempahla Iladi lenzwa, intambo yokuphepha noma ikheji lokuphepha | ||||
Ingulule
| Igama | Ikhodi | Inani elijwayelekile (mm)(idatha enemininingwane inqunywa ngokuya ngesimo sephrojekthi) |
| Ububanzi bempahla | W | 200 ≤W ≤800 |
| Ukujula kwempahla | D | 200 ≤D ≤ 1000 |
| Ukuphakama kwempahla | H | 60 ≤H ≤600 |
| Ubude obuphelele | GH | 3000＜GH ≤20000 |
| Ubude besiphetho sesitimela esiphezulu | F1, F2 | Qinisekisa ngokohlelo oluthile |
| Ububanzi bangaphandle be-stacker crane | A1, A2 | Qinisekisa ngokohlelo oluthile |
| Ibanga lesitaki ukusuka ekugcineni | A3, A4 | Qinisekisa ngokohlelo oluthile |
| Ibanga lokuphepha lebhafa | A5 | I-A5 ≥ 100 (i-hydraulic buffer) |
| I-buffer stroke | PM | Ukubala okuqondile (ibhafa ye-hydraulic) |
| Ibanga lokuphepha leplathifomu yezimpahla | A6 | ≥85 |
| Ubude bokuphela kwesitimela esiphansi | B1, B2 | Qinisekisa ngokohlelo oluthile |
| Isisekelo samasondo e-Stacker crane | M | M=W+2150(W≥600) M=2750(W＜600) |
| I-offset yesitimela ephansi | S1 | Qinisekisa ngokohlelo oluthile |
| I-offset yethrekhi yesitimela ephezulu | S2 | Qinisekisa ngokohlelo oluthile |
| Uhambo Lokuthatha | S3 | ≤2000 |
| Ububanzi bebhampa | W1 | - |
| Ububanzi bendawo | W2 | I-D+200(D≥800), 1000(D＜800) |
| Ukuphakama kwesitezi sokuqala | H1 | Isandiso esisodwa H1 ≥550, isandiso esiphindwe kabili i-H1 ≥750 |
| Ukuphakama kwezinga eliphezulu | H2 | I-H2 ≥H+430(H≥400) H2 ≥830(H＜400) |
Izinzuzo:
Uchungechunge lweCheetah luyimpahla efanelekile yokugcina izinto ezizenzakalelayo ezinqolobaneni ezincane.Idizayini ethuthukisiwe kanye nendlela yekhwalithi ephezulu ivumela uchungechunge lweCheetah ukuthi lugijime ngesivinini esingafika ku-360m/min, ijubane elingu-4m/s2, nobude bokufakwa obufika ku-25m, futhi umthwalo walo awudluli ku-300kg.
• Idizayini ethuthukisiwe kanye nesakhiwo sekhwalithi ephezulu kwenza i-Cheetah series stacker crane ihambe ize ifike360 m/min.
• Isisindo sephalethi sifinyelela ku-300 kg.
• I-variable frequency drive motor (IE2), isebenza kahle.
• Amayunithi emfoloko angenziwa ngezifiso ukuphatha imithwalo ehlukahlukene.
• Ubude bokufaka bungafika kumamitha angama-20.
• Ubude obuncane besitezi sokuqala: 700mm~850mm.
Iphrojekthi icala:
| Imodeli Igama | I-TMBS-B2-200-15 | ||||
| Ishalofu labakaki | Ishalofu Elijwayelekile | ||||
| Ukujula okukodwa | I-Doubledeep | Ngamunye | Ukujula kabili | ||
| Umkhawulo wobude obukhulu ngu-GH | 15m | ||||
| Umkhawulo wokulayisha omkhulu | 200kg | ||||
| Isivinini sokuhamba esiphezulu | 360m/min | ||||
| Ukusheshisa ukuhamba | 2m/s2 | ||||
| Isivinini sokuphakamisa(m/min) | Kulayishwe ngokugcwele | 165 | 165 | 165 | 165 |
| Akukho mthwalo | 165 | 165 | 165 | 165 | |
| Ukuphakamisa ukusheshisa | 2m/s2 | ||||
| Isivinini semfologo(m/min) | Kulayishwe ngokugcwele | 50 | 50 | 50 | 50 |
| Akukho mthwalo | 65 | 65 | 65 | 65 | |
| Ukusheshisa imfoloko | 0.5m/s2 | ||||
| Ukunemba kokuma okuvundlile | ± 3mm | ||||
| Ukuphakamisa ukunemba kokuma | ± 3mm | ||||
| Ukunemba kokuma kwemfoloko | ± 3mm | ||||
| Stacker Net Isisindo | Cishe i-4,000kg | Cishe ama-4500kg | Cishe ama-4000kg | Cishe ama-45,00kg | |
| Umkhawulo wokujula komthwalo D | 600~800 (kufaka phakathi) | 600~800 (kufaka phakathi) | 600~800 (kufaka phakathi) | 600~800 (kufaka phakathi) | |
| Umkhawulo wobubanzi bokulayisha W | W ≤600 (okuhlanganisiwe) | ||||
| I-MotorSpecification kanye namapharamitha | Izinga | AC;31.4kw*2;3 ψ ;380V | |||
| Phakama | AC;25kw;3 ψ;380V | ||||
| Imfoloko | AC;1.13kw;3 ψ;4P;380V | AC;1.13kw;3 ψ;4P;380V | AC;1.13kw;3;4P;380V | I-AC;1.13kw; 3ψ ;4P;380V | |
| Ukunikezwa kwamandla kagesi | Ibha yebhasi(5P; kufaka phakathi ukubeka phansi) | ||||
| Ukucaciswa kokunikezwa kwamandla | 3 ψ ;380V±10%;50Hz | ||||
| Umthamo wokuphakelwa kwamandla | cishe 90kw | ||||
| Ukucaciswa kwezitimela eziphezulu | I-i-beam 100*68*4.5(Ibanga lokufakwa kukaloliwe ophahleni alikho ngaphezu kuka-1300mm) | ||||
| Izitimela eziphezulu ze-S2 | - 380 mm | ||||
| I-Ground rail Specifications | H180*166 | ||||
| I-Ground rail offset S1 | - 60 mm | ||||
| Izinga lokushisa lokusebenza | -5 ℃ ~ 40 ℃ | ||||
| Umswakama osebenzayo | Ngaphansi kuka-85%, akukho ukufingqa | ||||
| Amadivayisi okuphepha | Vimbela ukonakala kokuhamba: inzwa ye-laser, ukushintshwa komkhawulo, i-hydraulic buffer Vimbela amakheshi kusuka phezulu noma phansi: izinzwa ze-laser, amaswishi anomkhawulo, amabhafa Umsebenzi wokumisa izimo eziphuthumayo: inkinobho yokumisa isimo esiphuthumayo Isistimu yebhuleki ye-EMSSafety: isistimu yebhuleki kagesi enomsebenzi wokuqapha Intambo ephukile (iketango), ukutholwa kwentambo exekethile (iketango): inzwa, indlela yokubopha umsebenzi wokuthola indawo yeCargo, inzwa yokuhlola isikhungo semfoloko, ukuvikela umkhawulo we-torque yeforki Idivayisi yokulwa nokuwa: ukutholwa komumo wempahla inzwa Iladi, intambo yokuphepha noma ikheji yokuphepha, indlela yokulwa nokugwedla | ||||
