Insight丨Let’s Learn Inform Production Line in Workshop

22 views

Automatic Roll Forming Machine for Uprights

Europe imported upright production line – Compared with domestic counterparts, it reduces 2/3 production personnel; the production efficiency is increased by 3-5 times, and the production speed of the whole line can reach 24 m/min; the production accuracy is higher, and the hole pitch error is controlled within ±0.1mm, the cumulative 15m length error does not exceed ±1mm

(Uptight punching)

(Upright rolling)

(The robot stacking uprights)

Automatic Roll Forming Machines for Beams

Europe imported beam production lines (two of lines) – Compared with domestic counterparts, 6 intermediate production steps are reduced, the production speed of the whole line can reach 50 m/min, and the production efficiency is increased by 5 times; it can ensure that the length error of 4mdoes not exceed ±1 mm.

(Overall photo of beam production line)

(The robots welding and stacking beams; inside the two red curtains are welding robots)

(Stacking process: the electromagnet at the end of the robotic arm will adsorb and grab the target work piece, and then place it in a certain sequence)

(Side view)

Automatic Bending Machines Producing Extremely Accurate Panels

Europe imported panel production line-the whole line speed can reach 25m/min, the high-speed tracking cutting can reach 80m/min, and The Finished efficiency for riveting and bending can reach 8 pcs/ min.

In terms of product accuracy, the length error is controlled within ±0.5mm, the diagonal error is controlled within ±1mm, and the hemming angle error is controlled within ±0.5mm.

(Panel rolling section)

(Panel forming section, stacking section)

High Quality Powder Coating Production Line

Powder coating line-using imported automatic spray gun, Nippon and JOTUN brand polyurethane outdoor powder, powder spread evenly, no dead ends groove, smooth surface, good gloss, and bright colors, durable. Compared with domestic counterparts, the amount of powder used saves 20-30% of the powder consumption.

(Beam loading area)

(Beam unloading area)

NanJing Inform Storage Equipment (Group) Co.,Ltd

Mobile phone: +86 13851666948

Address: No. 470, Yinhua Street, Jiangning District,Nanjing Ctiy,China 211102

Website: www.informrack.com

Email: kevin@informrack.com


Post time: Oct-13-2021

Follow Us